Shaking Unit

SHAKING UNIT

PERFORMANCE AND BENEFITS

This device is designed to give cross direction activity to the stock in the forming zone of the Fourdriner, which allows changing the orientation of the fibers (contained in the paper stock
).

Reduction of the energy requirement.

  • No vibration transmitted to floor
  • Permits manufacture of heavier grades with better formation
  • Improvement of paper formation
  • Improvement of CD strength

SPECIAL FEATURES

The stroke can be mechanically adjusted by means of angular position of the rotating masses. The shaking device is controlled by a control cabinet. The controls are gathered on the operator screen. The use in combination with a carbon fiber breast roll permits to reach higher shake numbers for the same force as a standard metallic breast roll, together with a reduced power consumption. In order to reach high values of stroke at high frequencies, we customizes each shake unit rod in terms of mechanical strength. Doing so, the range of frequency and stroke is optimized according to the customer needs. Our shake unit design integrates the lubrication unit together with its piping. This makes the unit very compact and easy to install.

Technical features

Typical Mechanical Shaker

Recoiless Shaker

Max load to be shaken

2.500 kg

2.000-5.000 kg

Frequency range

150/550 str/min

150/600 str/min

Max. Shaking Amplitude

20 mm

25 mm